WEEK 16

WEEK 16

DATE: 27/5/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  PROPOSAL REPORT WRITING 

Activities

• Completing the full report for Final Year Project 1 from Chapter 1 to Chapter 6.
• Send the full proposal report to supervisor via email to check the contents of my report and to check for plagiarism.
• My supervisor will inform if there any corrections or improvement to be done through email.
• The hard copy will be send only if supervisor satisfied with the report proposal.

WEEK 15

WEEK 15

DATE: 21/5/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  PROPOSAL REPORT WRITING 

Activities

• I continue doing report writing for chapter 3 which is methodology. In the methodology, it must include block diagram, flow chart, circuit diagram, experiment test, components, data survey analysis and gantt chart.
• The components that will be used in this project are sound sensor FC-04, Microcontroller Arduino Uno, WeMos WiFi Module and Battery 9v. 
• Medical equipment that will be using for experimental purpose of this project is Terumo Terufusion TE-311 Syringe Pump. 

Terumo Terufusion TE-311 Syringe Pump

Arduino Uno

- Arduino is an open source electronic board, based on flexible and easy to use software and hardware.

Sound Sensor FC-04

-Sound Sensor is used to detect the alarm sound from medical equipment.

Arduino WeMos WiFi Module

- Arduino WeMos is used for WiFi connectivity in order to send data to social media.

WEEK 14

WEEK 14

DATE: 13/5/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  PREPARING FINAL YEAR PROJECT 1 REPORT PROPOSAL 

Activities

• Update the literature review for FYP 1 report. The article that I have reviewed are ' Development of Medical Equipment Alarm Monitoring System', ' A New Sensor Uses Sound to Diagnose Faults in Industrial Machinery', ' Medical Device Alarms Pose Safety Issues for Hospitals', ' Internet of Medical Things Devices Demand Dynamic Networks', 'Detection System of Sound Noise Level(SNL) based on Condenser Microphone Sensor' and I also compared on the sound sensor that is suitable to be used for this project. These are all the articles that related to my project. By studying these articles, I have the idea on the flow in developing this prototype.
• In the article review, I have summarize all the information that I get from the articles. So, it is easier to know the focus of those articles.

Literature Review Summary

Title	Development of Medical Equipment Alarm Monitoring System	Detection System of Sound Noise Level(SNL) Based on Condenser Microphone Sensor	A New Sensor Uses Sound To Diagnose Faults In Industrial Machinery	My Project: Detection of a False Alarm Characteristic Error
Author and Year	Yoshinori Yamashitaa , Tatoku Ogaitoa , Shingo Kasamatsua, 2013	Juniastel Rajagukguk and Nurdieni Eka Sari, 2018	Sinc La Ciencia es notisia, 2014	2019 (Currently)
Aims	To provide a system that able to gather alarm from various medical equipments.	The research aims to know the noise level of the environment.	The paper  study on the potential of wireless sensors to detect minute fissures in industrial machinery by the ultrasonic waves .	To develop an alarm sound detection system that able to update status of the medical equipment through smartphone .
Input	Medical device alarm sound.	Noise from the environment.	Detect ultrasonic waves emit from the machine.	Medical equipment alarm sound.
Sensor	_	Condenser microphone  sensor	Ultrasonic sensor	Sound sensor
Microcontroller	_	Arduino Uno	_	Arduino Uno
Network  Connection	IEEE 802.15.4(ZigBee) radio module	_	Central computer	WiFi
Output	Obtain the type, time and place of the medical equipment.	The noise level will be displays on the LCD screen.	Capture the normal state of operationor if there is fault due to internal fracture of part of the machine.	Information on the faulty part of the medical equipment.

WEEK 13

WEEK 13

DATE: 6/5/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  MEETING WITH SUPERVISOR

Activities

• Final check on the slide presentation.

DATE: 8/5/2019

SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  PRESENTATION DAY

Activities

• The event start at 12.00 p.m. in Gemilang Hall. The students came early to the venue to prepare before the presentation. The accessor who accessed the students are Dr Mohd Noor and Madam Sabrina and the presentation went smoothly. 

DATE: 10/5/2019

SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  FYP1 PROPOSAL REPORT WRITING

Activities

• Focusing on writing the report proposal as the due date to submit the report is on 3/6/2019.
• Start writing chapter 1 which consist of the background study, objective, problem statement, significance and limitation of the study.

WEEK 12

WEEK 12

DATE: 29/4/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉  CIRCUIT CONSTRUCTION

Activities

• Construct circuit on the breadboard to test the sound sensor and to get preliminary result. 
• The equipment used for this test is Terumo Terufusion TE-311 syringe pump. 
• The sound sensor captured the alarm sound from the syringe pump in the condition where the syringe pump having plunger error and condition where low battery.
• The alarm sound showed the wave pattern in the oscilloscope where I able to know the frequency and amplitude of the alarm sound. 

Example of condition syringe pump battery low:

Frequency: 4.108kHz

 Amplitude: 2.52V

Frequency: 5.453kHz

 Amplitude: 2.28V

Frequency: 4.056kHz

 Amplitude: 2.24V

Example of condition syringe pump plunger error:

Frequency: 3.654kHz

 Amplitude: 2.48V

Frequency: 3.737kHz

 Amplitude: 2.4V

Frequency: 3.903kHz

 Amplitude: 2.48V

DATE: 3/5/2019

SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR

👉  FINAL FYP 1 BRIEFING

Speaker: Dr Imran Bin Mohamad Sofi

Activities

- The briefing content are : FYP 1 Assessment Scheme, Presentation Day, Progress Report Submission, Poposal Report Submission.

- Progress Report

(Logbook / Blog)  = 30%

- Proposal Presentation = 35%

-Proposal Report = 35%

WEEK 11

WEEK 11

DATE: 25/4/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉 MEETING WITH RADIBEMS - SELAYANG HOSPITAL

Activities

• The objective of this visit is to gain more information regarding alarm system in medical equipment and how the medical staffs handled with the breakdown of medical equipment in the hospitals.
• The other purpose of this visit is to ask the Radibems Sdn Bhd staffs to answer the survey questionnaire on biomedical engineering service and maintenance. This survey answer will help to guide me through this project.
• Total of 10 respondent from Radibems Sdn Bhd at hospital selayang answer the survey questionnaire. 
• During the visit, I also have an interview session with one of the engineer of Radibems Sdn Bhd. The staff explained on how the medical staff handled with the breakdown of medical equipment in the hospital. When there is breakdown of medical equipment, the medical staff need to fill in the form in order to inform about the breakdown medical equipment. Then, the form will be send to the admin of the hospital. The technician or biomedical engineer will only be informed of the medical equipment breakdown through the admin. The staff then add, they actually required about 2 hours in order to respond to any breakdown report because of the procedure that need to be followed by medical staffs. By reviewing this situation, the biomedical engineer/technician able to respond to any breakdown report early if there is the system that able to send the information directly to them. 
• The staff also explained on the troubleshooting of the medical equipment. The biomedical engineer/technician will be given 7 days to fix the breakdown in medical equipment. They will take maximum 3 days to detect the faulty part in the medical equipment that cause the breakdown. If they failed to fix the medical equipment in 7 days, they will need to send the medical equipment to the vendor and their salary will be deducted for the days after the time frame given. This is the situation that the technician and also the company want to avoid as it could cause a loss to the company. The company need to pay to the vendor for fixing the medical equipment. So, they need to be fast in fixing the medical equipment to avoid the loss. The staff add that as for now, they only depend on the skills of the technician and tester to detect the faulty part in the medical equipment. It would be good to have a system that able to directly detect the faulty part in medical equipment. 

DATE: 26/4/2019

SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉 UPDATING DATA SURVEY

Activities

• Update the survey data analysis based on the answer from the respondent of Selayang Hospital.

DATA ANALYSIS BASED ON DEMOGRAPHIC INFORMATION
RESPONDENTS	MALE	18
	FEMALE	2
COMPANY'S NAME	RADIBEMS SDN BHD	20
COMPANY NATURE OF BUSINESS	MEDICAL EQUIPMENT SERVICES AND MAINTENANCE	16
	HOSPITAL SUPPORT SERVICES	7
	BIOMEDICAL ENGINEERING	2
	OTHERS	1
POSITION OF RESPONDENTS	HEAD OF BEMS SERVICE CENTRE	2
	BIOMEDICAL ENGINEER	2
	BIOMEDICAL TECHNICIAN	4
	BIOMEDICAL TECHNICIAN III	4
	TECHNICAL MANAGER	2
	SPECIALIST	2
	TECHNICIAN	5
WORKING EXPERIENCE	< 1 years	4
	1 – 5 years	11
	> 5 years	6

WEEK 10

WEEK 10

DATE: 15/4/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉 SLIDE PRESENTATION

Activities

• Do improvement on slide presentation- block diagram, flow chart, preliminary result
• Change the topic in the literature review.
• Add vibration sensor specification in the comparative study of the sensor.

DATE: 17/4/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR
👉 EIGHT MEETING WITH SUPERVISOR

Activities

• Supervisor checked on the slide presentation- inform the part that can be improved.
• Do a mock presentation in front of supervisor as for the preparation on the Proposal Presentation Day.
• Need to add more information regarding the detection of a false alarm characteristic error in the slide presentation.
• Supervisor asked to add respondent of the survey questionnaire. I did a google form of the survey questionnaire to make it easy for Biomedical Engineer/ Technologists/ Technician in the hospital to answer the survey.