WEEK 5 FYP2

WEEK 5

DATE: 19/8/2019-22/8/2019
SUPERVISOR: SIR SHAH RIZAILLI BIN MUKHTAR


👉 INSTALLATION OF ARDUINO IDE VERSION 1.8.8

• I install Arduino IDE software and learning how to used it through google. Link is: https://www.digikey.my/en/maker/blogs/2018/how-to-get-started-with-arduino

• If we are using the Arduino IDE software for the first time, the screen will appear like the figure below. 

• There are also some library that need to be installed so that the programmed can be compile and run. The library include ArduinoJson, ESP8266 and also TelegramBot. For example, if we are using Blynk apps, then we need to install Blynk library. The library can be installed through board manager in the software. If fail to include one of these library, the programmed cannot be compile and will not work.

👉 TEST COMPATIBILITY OF SOUND SENSOR WITH ARDUINO UNO

Activities

Figure 1: Connection of Arduino Uno and Sound sensor

Video: https://drive.google.com/drive/folders/1tgmlesM2eGEe5w100SmsGRKa26C2tQKI

• I have construct the circuit by connecting Arduino Uno with sound sensor module. An LED is used to show the detection of sound by the sound sensor. The LED will blink if the sound sensor detect the sound. For example, I try plucking finger near the sound sensor and the LED blink. At some moment, it also detect sound when people speaks. So, the sensitivity of the sound sensor must be fixed.

👉 MEETING WITH SUPERVISOR

• The purpose of this meeting is to update my progress to Mr Shah Rizailli and also discussing on the signal conditioning circuit that suitable to be used for this project.
• Supervisor also told me on how to do the data collection and to get more data as possible.